Vnc For Mac And Iphone

  1. Vnc For Mac Free
  2. Vnc Mac Iphone

‎Using your iPhone or iPad, you can connect to a Mac or Windows PC, and see the files, programs, and resources exactly as you would if you were sitting at your desk, just on a smaller screen. Before buying, please try Mocha VNC Lite FEATURES: - Standard VNC protocol. macOS sign on with user id. VNC Viewer for iPhone connects your iPhone or iPod touch to a computer anywhere in the world, displays its desktop, and lets you take control. VNC for iPhone and iPad - Download Free Lite Version. VNC gives easy access to Mac OS X and Windows PC. Supports Swiftpoint GT mouse. Using your iPhone, you can connect to a Windows PC or Mac OS X and see the files, programs, and resources exactly as you would if you were sitting at your desk, just on a smaller screen. This iPhone app is exclusively designed to remotely control your Mac computer.

Frequently Asked Questions ?

General


Installation


Troubleshooting


Mac

Functionality

  1. Cannot find ctrl + alt + del ( + does not work in portrait mode)


Can Mac OS X Lion (10.7 or better) be used

With v 3.0, it is possible to use Mac sign on, and therefore get around the buggy sign on page in Mac Screen sharing.

Difference between Lite and Paid version

Compared to the Lite version the full version has:
- All keys in the horizontal scroll list of keys above QWERTY keyboard are enabled
- Extra keys as ALT, CTRL, Option and the Apple key
- Support for right mouse button, hover and mouse wheel
- Ctrl+alt+del key. Needed if using Win 200x as a VNC Server

Cannot find ctrl + alt + del

VNC Lite has no support for special keys. In the paid version, ctrl+alt+del is in the horizontal scroll list of keys above the QWERTY keyboard.

Is there a limit to the server screen size

V 1.1 has been tested with screen size 3200x3200. Such a size or larger is not recommended, as to the size of data needed to be send to the Client. One single screen 3200x3200 is 30 M byte, if send uncompressed!

Is SSH-2 Tunnel supported

It is not supported.

How to use dynamic IP address

If your VNC server does not have a fixed IP address or name, a solution could be a dynamic DNS name from a service as NO-IP The basic version of the service is free.

How to connect to your PC/Mac from the Internet

To allow a connection with the iPhone on the EDGE network or another wifi network, maybe at your local Cafe, you must configure the router/firewall protecting your Home network to allow traffic on port 5900. This could be a security risk! Read the router manual for advice. An example: I have a router at my house, which connect to the Internet. It has IP address 88.1.2.44 on the Internet. The router has a fixed IP address on the Internet. If your internet provider (ISP) offers a dynamic address, a solution could be to use a service as NO-IP Click here to see your current router IP address.
My Mac OS X Workstation has a fixed IP address on the local network (wifi) at 192.168.2.2
In the router firewall configuration I have configured, if it receives data on port 5900, forward it to 192.168.2.2.
When on the EDGE network with the iPhone, I will in mocha vnc as VNC server IP write
  • 88.1.2.44 , and as port 5900 (Not the IP address for the Mac!)
VNC Password is the Password I have defined on the Mac in Screen sharing , see How to configure VNC on Mac OS X
With canyouseeme.org it is possible to check if the router has been configured to allow port 5900 access. At field What port type 5900, and click [Check]. In the center of the page the result is shown (below some google ads)
If you open the router for port 5900 access, make sure to use a proper password in the Mac screen sharing , or your system will be at high risk.

Is UltraVNC MS Logon supported

No. At the moment we have no plans to support this option. It is not easy to configure on the Windows PC, and will be a source for a lot of support

Can a RealVNC Enterprise server (in paid mode) be used

In Realvnc Enterprise Edition, select
  • VNC Password
  • Encryption: Prefer off

and it can be used as a normal VNC Server

Are multi screens server supported

2 monitors will in VNC be seen as one large screen. There is no support for only displaying a single monitor. Notice the VNC Server, tightvnc has support in the server to select only a part of the screen to be used for VNC.

Do you support the Vine Server

No, and at the moment we have no such plans. Use the Server already included with the Mac OS X

How to remove Mocha VNC from the iPhone

In the iPhone home screen, hold down the VNC icon, until all icons start shaking. Now tap the program to delete, and you will be asked to confirm the removing
Server

It keeps reporting negotiation

  • Wrong password, or a VNC Server type/version which is not supported
  • Some VNC Servers support other user/password validation. Make sure the VNC Server is configured for VNC Password
  • If the iPhone is not using wifi, but only the EDGE network, the IP address for the VNC Server given in Mocha VNC must be your Home router IP address.
    The router must also be configured to forward port 5900 traffic to your Mac/PC. To open port 5900 could be a security risk. Check the router manual for advice.


Program crash, when tapping mouse or keyboard icons

The iPhone is low on program memory. Reboot the iPhone. Also notice , using a server screen larger than 2000x2000 will give memory problems. In v 2.2 , it is possible to enable memory warnings in menu - edit connections.

Cannot make a connection to the Server

As a start make sure you have installed a VNC Server on your PC, or if using Mac OS X, has enabled the screen sharing.
Either
  • Wrong IP address for the VNC Server. The IP address shown in the Mac OS X Remote Management may be a name only known to the DNS for the Mac, not the iphone. In Mac:System Preferences - Network, the IP address for the Mac can also be located.
  • The VNC Server has not been started
  • A firewall stopping access on port 5900. A firewall may run on the PC/Mac
  • Have installed PeerGuardian on the Mac/PC, and configured it to block some IP addresses.
  • The iPhone/iPod is not on the same network as the VNC Server. If using wifi, check wifi is enabled on the iPhone and not only the EDGE network. Also it is the same wifi network as your PC/Mac , and not your neighbors network.
  • If the iPhone is not using wifi, but only the EDGE network, the IP address for the VNC Server given in Mocha VNC must be your Home router IP address. The router must also be configured to forward port 5900 traffic to your Mac/PC. To open port 5900 could be a security risk. Check the router manual for advice.


Where to find VNC Servers for Windows/Linux

There are many different types of VNC Servers. A good choice could be RealVNC . They have a freeware and a paid version. The paid version is needed if using Windows 7/8/10.
Other servers:

How to find the IP address on a Windows PC

- In Windows Click on the start menu button and then on run

Vnc For Mac Free


- Type 'cmd' (without quotes) and hit enter
- A black DOS box is shown with a prompt
- Type ipconfig and hit enter

I can see the desktop in Mocha VNC, but mouse and keyboard does not work

The vnc server in read only mode. (view mode, it is also called). Must be solved in the VNC Server configuration, not in mocha vnc.

Screen does not refresh

If the screen is large, and/or the network slow, it can take some time to refresh. Mocha VNC has in menu (+) icon, a refresh option, but it should not be needed for normal use. Using Refresh will just make it more slowly, as it requests the full Server screen to be send again.
Some VNC Servers can have problems with refresh. If problems is seen with a VNC Server and it is not a beta version, please write a mail to our support function. Include full VNC server name, version and OS type.

RealVNC 4.4.2 hangs in negotiation

Make sure it is configured for
  • Authentication: VNC Password
  • Encryption: Prefer on
  • The Password select in [Configure] is the same as in Mocha VNC

Screenshot

Keys as / @ : ; does not work

Configure Mocha VNC, menu - configure for the same keyboard type as your Mac.
If using a VineServer on Mac, the shift keys will not work. We do not support the VineServer, only the VNC Server which is part of Mac OS X.

Right click on Mac OS X Tiger does not work

If using the older Mac OS X Tiger (14.4.x) , there is no support for mouse right click with Mocha VNC.

How to use different displays in VNC for Linux

In X11 type VNC Servers used on Linux/UNIX systems it is possible to use displays. port = display + 5900
Display 0 = 5900
Display 1 = 5901
Display 2 = 5902
...
The port number can be configured in mocha vnc , connect window.

Host has closed the session

If this message is shown, at the negotiation, it could be
  • A firewall on the PC/Mac stopping port 5900 access
  • Wrong VNC Password. Check if it is the same on the Server and Mocha VNC<
  • If using a Mac, (x) all users must be selected. See How to configure VNC on Mac OS X
  • If using a Mac, the 32 bit color option must be enabled (connect dialog in Mocha VNC)
  • If using UltraVNC, notice MS Logon supported is not supported in Mocha VNC


How to get a faster display

  • Configure the desktop with a smaller screen. A screen size around 1000x1000 gives a good result
  • Use 8 bit color mode (connect window). Mac OS X Remote Management supports only 32 bit, and will fail in 8 bit mode
  • Use wifi and not the phone network
  • If using a Windows or Linux PC, try different VNC Servers. RealVNC in paid mode could be a good choice

How do I get a VNC Password

Depends on your Server type. If it is Mac OS X, see our Mac OS X page.
If it is a PC, you must first install a VNC Server on the PC. Try RealVNC for Windows and Linux

VNC and Windows 7/8/10

We have had best results with RealVNC Enterprise Edition. They offer a trial version.
UltraVnc also has a new free version for Vista/Windows 7/8/10 at www.uvnc.com TightVnc has a beta v 2.0 which can run on Windows 7 at www.tightvnc.com Tip: In Realvnc Enterprise Edition select,
  • VNC Password
  • Encryption: Prefer off


Managing your SunRay using your iPhone VPN and VNC

This is a guide from a customer. We cannot offer support on Sunray installations, but hopes these notes can be useful. Items Required:
  • iPhone firmware 2.0 or 2.0.1 installed on your iPhone
  • Mocha VNC Lite or Paid version
  • Your SunRay VNC file edited
  • VPN Setup on your iphone for your corporate network
  1. Install Mocha VNC on the iPhone
  2. Edit your xstartup file in your .vnc directory on your SunRay to control your SunRay Desktop from your iPhone
    On your SunRay go to Launch>> Run Applications
    *
    * In the “Run Applications window type the following command
    * gedit /home/homedirectoryname/.vnc/xstartup
    * Example: gedit /home/jmathers/.vnc/xstartup (space after gedit)
    * Click on “Run”
    *
    * Within Text Editor,
    replace the
    twm&
    line with
    gnome-session&
    * Now do a File>> Save
    * Then do a File>>Quit
    * This (only needs to be done one time for setting up your Sunray for future VNC sessions) Your would reedit the xstartup file if you only wanted to VNC into a terminal window on your SunRay and put the ”twm&” command back in to the file.
  3. Go to your SunRay and start a VNC Session
    * Login to your SunRay
    * Go to Launch>>Applications>>Utilities>>Terminal
    * Type in vnc start hit return
    * Enter a password of at least 6 characters hit return
    * (Verify) Re enter the password hit return
    * Your VNC Session will now start on your SunRay
    * Write down the information in the “xmessage in the upper left hand corner.
    * Example: Started on “stb1-usdk04-06:1”
    * Once you write that server string down, you can click on the “Okay” button
    * Now you must translate that to an actual IP Address for your iPhones VNC
    * Move the VNC session out of the way on the Sunray and start another terminal window. Go to Launch>>Applications>>Utilities>>Terminal
    * Type in nslookup hit return
    * Type in nameofyourserver hit return
    * (Example tb1-usdk04-06 hit return)
    Your IP address for the server with your SunRay VNC Session will come back and says example:
    * Results will look like Name: tb1-usdk04-06.network.com
    * Results will look like Address: 123.133.1.100 (Write this IP address down for your iPhone)
    * Quit the nslookup command by typing exit
    * Write down the IP Address, and the password your gave your VNC session
  4. Go to your iPhone and login to VPN, connecting you your network
  5. Once logged into VPN on your iPhone, click on the HOME button and click on the “VNC Lite” application button
    * Click on “Connect” to configure your iPhone VNC for your SunRay
    * VNC Server IP address = (The IP address you wrote down for your SunRay)
    * VNC Server Port =
    Look at your SunRay VNC Session and at the top of the window there is a bar and it will have VNC information, you have to translate this to the proper port and it is simple
    Example: VNC: tb1-usdk04-06:1 (jmathers)
    All your care about is the number after the colon (in this case :1 )
    Port Conversion formula ( port = display + 5900
    · Display 0 = 5900
    Display 1 = 5901
    Display 2 = 5902 and so on and on
    (My session had the number “1” after the colon, so my port is 5901)
    · VNC Password = (This is the password you wrote down from your SunRay VNC Session) You made the password when starting the SunRay VNC Session
    · Click on “Connect”
    · It should take a few seconds to display your SunRay desktop
    You now have full control of your SunRay from your iPhone
    1. To exit your iPhone VNC session, Click on the “+” symbol and tap on “Disconnect”
    2. To exit your VNC session on your SunRay. Go back to your SunRay and click on the “X” in the upper right hand corner of your VNC window. This will close your session.


    Black bar with buttons disappear

    If you shake the ipad/iphone the bar can hide/show. If you do not like this option, turn it off in menu - configure - toggle black toolbar (default it is off).

Home Uninstall EULA Contact About Us Privacy Sitemap
Copyright (c) 1997-2020 MochaSoft Aps. All Rights Reserved.

Vnc Mac Iphone

Mac has integrated VNC server so users don’t have to install VNC server on Mac in order to use VNC software or apps to control Mac from iPhone, iPad, Android, PC or another Mac. In this quick guide, we will show you how to use an iPhone or iPad to control a Mac through the Screen Sharing in OS X. By doing so, you can see anything displayed on your Mac right on your phone or tablet, you can get access to your Mac, the files, programs on your Mac as if you were sitting in front of your Mac. You can control the mouse remotely using your iPhone and type into your Mac using the virtual keyboard on your touch screen. Apple doesn’t include VNC support into iOS, but we have third-party VNC viewers thankfully, notably the VNC Viewer from RealVNC. Note that VNC Viewer is available for free from App Store. You can download it from previous linked page.

How to control Mac from iPhone or iPad using VNC Viewer?

On your Mac, click the Apple menu from its top menu bar, choose System Preferences from the drop-down menu. Then click Sharing in the System Preferences window, and click to enable the Screen Sharing. You will then find the status of Screen Sharing changes and the VNC server address. This is a your Mac’s IP address in the local network. If you need to access your Mac through the internet, you will need a dedicated public IP instead.

On your iPhone or iPad, make sure it is connected to the same WiFi as your Mac. Then launch the VNC Viewer app. You can go to the Bonjour from the side menu to let the VNC viewer automatically discover your Mac.

You can also go to add your Mac to the Address Book of the VNC viewer. You need to manually type in the VNC server IP address when you choose to manually add Mac to the Address Book of VNC Viewer on iPhone or iPad.

On the Address Book screen, tap on the Add button (+), then type in the VNC server address which you can find in the Screen Sharing on Mac. Give your Mac a name and save. You will be prompted for authentication with your Mac’s username and password when you connect.

Once the VNC session is established, you can use the iPhone or iPad to control over the Mac screen. For example, you can tap with one finger to left-click, pinch with two fingers to zoom, touch and drag to position the mouse cursor, double tap to double-click, tap with two fingers to right-click, tap to open the virtual keyboard and start typing, etc.

Related pages

Comments are closed.